Adventures in ham radio

Archive for the ‘equipment’ Category

WW7D Roves the 2015 January VHF Contest

The ARRL January VHF contest brings a pile of challenges for a rover. The weather is a big uncertainty. In the Pacific Northwest we rarely have debilitating snow in the lowlands (but did in 2012). Sometimes the snow prevents travels to modest elevations (3,000′). Rain and fog are more likely the issues for us. And fog mixed with near-freezing temperatures can lead to icing of antenna parts while driving.

The other challenge for a rover is darkness. The days are getting longer, but are still way too short. This isn’t just a problem while roving—logging in the dark, setting up antennas in the dark, etc. Rather it affects the station installation. It’s a challenge coming home from a long day at work and motivate antenna installation…likely in the rain. (I know, I know, at least we don’t have the cold temperature that much of the country has.)

And then there is the “rust” of four months without roving for a contest. (The Fall Sprints help a bit with this. )

Even with these challenges, somehow I managed to eek out a rover station this year to compete in the Limited Rover class. I didn’t have the time to do too much innovation over last September. There were a few station adjustments and some tweaking of the route.

Route

The route followed the same general pattern I used last September, starting out in Ocean Shores, WA near the CN76/CN77 line on Saturday morning, and working my way to the CN85/CN95 line on the Columbia river near N. Bonneville, WA, and then to a motel in Centralia, WA for the night.

Sunday’s route went from Centralia to Mowich Lake Road near Carbonado, which permits me to hit CN87 at 2,160′, CN86 at 3,000′ and CN96 at 3,100′. This was followed by a new location in the parking lot of Central Park of Sammamish, WA, which gives access to CN87 and CN97 at 700′. Then off to CN88 at a school parking lot (400′) in Lake Stevens, capped of by a trip up Mt. Pilchuck at about 3,000′.

Planned stops for the 2015 Jan VHF contest
Planned stops (Saturday are blue, Sunday are green) for the 2015 January VHF contest

I sent my schedule out to the members of the Pacific Northwest VHF society. For the most part, I stuck to the schedule. The two major changes were that I began in CN76, moved to CN77, and then back to CN76. Also, it turns out that the CN87/CN97 spot in Sammamish was so productive that I skipped the next stop in CN97 at 1,450′ on the side of Tiger Mountain. The change helped keep me on schedule.

GRID Location
Saturday Start End
CN77 Ocean Shores      12′ 11:00am   11:25am
CN76 Ocean Shores      15′ 11:40am   12:50pm
CN77 Ocean Shores      12′   1:05pm    1:50pm
CN86 Kalama, WA 1687′    4:50pm    5:50pm
CN85 Kalama, WA 1760′    6:20pm    7:35pm
CN95 Bonneville     65′   9:00pm  10:00pm
         
Sunday Start End
CN96 Carbonado 3183′    7:45am    9:15am
CN86 Carbonado 3049′    9:30am  10:15am
CN87&CN97  Sammamish   738′ 12:00pm  12:50pm
CN97 Issaquah 1461′    1:25pm    2:25pm
CN88 Lake Stevens   429′   3:55pm    5:15pm
CN98 Mt. Pilchuck 2980′    6:40pm    8:00pm

Equipment

The equipment list was quite similar to what was used for the 2014 September VHF contest. Three rigs took care of SSB and CW on the four bands a limited rover is allowed. A Kenwood TS-480 served as a 6m rig. Two meters and 432 MHz were handled by an FT-857D. And another FT-857D was used with an Elecraft XV222 transverter for 222 MHz.

For FM simplex frequencies there was an Alinco 6m FM rig, an Alinco dual band (2m/440 MHz) FM rig, and a Jetstream 222 MHz FM rig. The resulting six microphones demands discipline in always hanging the rig mic on the right hook…every time. I mostly did that.

A look inside the WW7D/R station
A look inside the WW7D/R station

One of the FT-857D heads was mounted on the dash, and the other FT-857D head and the Kenwood head were mounted on the center council using spring clamps. The system works well for my vehicle. Two rotor controls were used to turn the front and rear rotors. They were powered by a 600 watt inverter.

Two RF Concepts and two TE System bricks brought power up to near the maximum allowed for a limited rover on the four SSB/CW bands.

Another look inside the WW7D/R station
Another look inside the WW7D/R station

A dash-mounted cell phone provided a 24 hour clock for (paper) logging, and a second cell phone displayed my current grid. Both of these phones needed no data connection to provide these functions. One new piece of navigation equipment was a TomTom GPS. I purchased it just after Christmas and worked very hard to learn as much about it as I could. The route planning method is quite different from the previous GPS I was using. In the end, the TomTom worked out pretty well.

Other pieces of equipment include a K1EL Winkeyer loaded with CW macros, a Tascam DR-1 digital recorder, a N8XJK Super Booster, a fancy homebuilt antenna switch, and a low-tech 3-position switch to move the CW paddle between rigs.

Here is a peak at the back side of the rack.

The sausage making behind the scene
The sausage making behind the scene

It’s amazing it all works. In fact, the only issue was with the power connector on the 6m amplifier, and that was minor. The rack is completely assembled, wired, and tested in my shack and then moved into the rover. Only power, external speakers, a paddle connector, a ground, remote heads, and 10 antenna connectors are attached for installation.

Antennas

Antennas were cleaned, refurbished, and tuned in preparation for the contest. I also did some clean-up and tuning of the two masts.

Rear antenna stacks

The rear mast extends to about 25 feet for when the vehicle is at a rover location and contains the following:

  • 50 MHz: Homebuilt 3-element Yagi (top)
  • 144 MHz: An 8 element WA5VJB “Cheap Yagi” (middle)
  • 222 MHz: An 8 element WA5VJB “Cheap Yagi” (bottom)
  • 432 MHz: 12 element LFA yagi (bottom)
The rear antenna stack from CN86
The rear antenna stack from CN86

Front antenna stacks

The front antenna stack can be extended to 25′, but typically sits about 10′ above ground. The antenna dimensions fit within Washington state’s overhang limits so that it can be legally rotated while in motion. For some parts of the contest, like driving up Mt. Pilchuck, the mast was lowered to about 8′.

  • 50 MHz: Two element classic hex beam (top)
  • 144 MHz: A 4 element WA5VJB “Cheap Yagi” (middle)
  • 222 MHz: A 6 element WA5VJB “Cheap Yagi” (bottom right)
  • 432 MHz: An 8 element WA5VJB “Cheap Yagi” (bottom left)
The front antenna stack facing north from CN86
The front antenna stack facing north from CN86

FM Antennas

For the four FM bands I used the following antennas:

  • 52 MHz: A mag-mount 6m 1/4 wave whip antenna
  • 146 MHz and 440 MHz: a hygain dual band loaded whip antenna
  • 223 MHz: A cross-over switch switched the 223 MHz FM rig and 222 MHz transverter between the front and rear 222 MHz antennas

The rear 6m and 432 MHz yagis were fed with LMR 400. All other directional antennas were fed with LMR-240.

The Contest

CN76 and CN77

I arrived at Ocean Shores with about 15 minutes to the contest start, and parked in the (car) parking lot of the small airport in CN76. Antennas were set up, equipment was checked out, and I prepared log sheets for the grid.

My first three contacts (6m, 2m, and 432 MHz) were with John, KF7PCL, who lives in Ocean Shores (CN76). QSOs were a bit slow after that. I kept pointing my antenna south to try and work K7NIT/R who was starting out the contest at the southern end of CN76. I found her after about 15 minutes.

Within the first 15 minutes, an Ocean Shores police officer pulled up next to my truck. He was friendly and curious, and left wishing me luck.

After an hour in CN76, I had worked only 25 stations. But, remarkably, 15 of the QSOs were also new multipliers.

When I arrived at my planned CN77 spot, a dirt turn-around at a T in the road, there was a house being framed! Too bad…it was an excellent spot. A nearby location along a creek gave me a good pullover, but the trees kept me from extending the mast to its full height. I could have re-positioned the truck to clear the trees, but that would have consumed even more time.

An hour in CN77 yielded only 21 QSOs and three new multipliers. A brief return to CN76 filled in a few missing QSOs, and I was on my way out of town. I take a small detour leaving Ocean Shores to pass through CN87 and CN86 so that I can work John, KF7PCL, in each grid on three bands (for a total of 12 QSOs). My unfamiliarity with the new GPS combined with being rusty logging while driving caused me to pull over for the last set of QSOs. I ended up about 15 minutes behind schedule.

CN86 and CN85

From that CN87/CN86 spot, it is about 1:45 until my next stop. In the process, I pass through CN86 into CN87 and back into CN86. For the first 30 minutes I worked zero stations. But then things picked up and I made 23 QSOs and three new multipliers before arriving at my stop. While whizzing southbound on I-5, I worked all four bands with WA7BBJ/R who was about 10 mile ahead of me in I-5. This was unplanned.

Once set up in CN86, I immediatelly worked WA7BBJ/R again, this time he had crossed into CN85. In all 38 QSOs and 10 new multipliers came from this location.

By the time I got set up 5 miles to the south, in CN85, I was 25 minutes behind schedule. The new location did not disappoint, and I quickly worked 42 stations. My last QSO was with KF7PCL back in CN76. By the time I left, I was only 12 minutes behind, with a 70 minute drive to N. Bonneville. A handful of en route QSOs contributed to the log.

CN85 and CN95

The CN85–CN95 border on the Columbia River is tucked away in a gorge. For the most part, only Portland stations can be worked from there, as signals are almost entirely blocked in the direction of Seattle (as the map shows). A state highway follows the river on the Washington side, and I-84 follows the river on the Oregon side.

Topography at the CN95 stop
Topography at the CN95 stop

I had a good reason to not be late to CN95. The reason was that Rachel, K7NIT/R (along with her driver, Etienne, K7ATN) was scheduled to be on the Oregon side of the Columbia River, while I was heading Eastbound on the Washington side of the Columbia River. We decided to do a cross-river grid dance.

I was supposed to arrive at 4:50, but turned up about 10 minutes late. Rachel was in CN95 and that gave us time to work the four lower bands. They moved into CN85 and we worked four more time. By that time, I hit CN95 and we worked again, and then they returned to CN95 for four more. The whole thing took 35 minutes, including some additional QSOs with K7YDL. It was awesome getting four bands worth of multipliers from CN95! That was a first.

Another 10 minutes of calling CQ produced only a couple of stations, before departing for an almost 2 hour trip to a motel in Centralia, WA. I only made one new QSO during this leg.

CN96 and CN86

The alarm woke me after five hours of sleep. Thirty minutes later, I was on the move to Mowich Lake road and CN96. First I had about 90 minutes of travel (mostly) through CN87…that provided 13 new QSOs. Then there was 20 minutes of travel through CN86 from about 2,200′ to 3,200′. Even though I had spent many hours in CN86 already, this brief trip through CN86 provided another 6 QSOs.

I arrived at CN96 about 2 minutes late and stayed for 95 minutes (instead of the scheduled 90), providing 51 QSOs. Back to CN86 for a (planned) 45 minute stay, I worked 27 stations (four of these were dups). By the time I hit CN87 again, I was 10 minutes behind schedule.

Leaving this grid intersection, I had a 95 minute trip that took me between CN87 and CN97 multiple times. The trip was remarkably productive, netting something like 35 QSOs.

The end point was a park in Sammamish, WA that had a long parking lot with a rotary at each end. The grid line passed through the eastern quarter of the lot. Barry, K7BWH/R, and Rod, WE7X/R had suggested we meet in this parking lot to do a small, 3 band, FM only, grid dance.

I was a couple of minutes late, but we worked each other, and a handful of other stations on FM simplex frequencies on 2m, 222 MHz and 432 MHz. I set up my antennas in both grids and worked what remained, primarily to the north.

The Canadian community pitched in some new multipliers: VA7FC (CN79 on 6m and 2m), VE7DAY (CO70 on 2m), and VE7XF (CN89 on 6m). A bit later, the rovers added even more multipliers. Dave, KA7RRA/R, on Mt. Pilchuck provided CN98 on 6m. Steve, KE7IHG/R, was in Ocean Shores in CN76, where we worked on 223.5 MHz FM. He then moved to CN77 and worked me on 4 bands, for 4 new multipliers–432 MHz was tough, but doable. The final new multiplier of the contest was KE7IHG/R on 6m from CN77.

WA7BBJ/R worked me on 4 bands while he was in CN97 and then, again, when he hit CN87. No new multipliers, but lots of points. Man…what an incredible spot! In fact, I overstayed my schedule, and skipped doing more CN97 from Tiger Mountain. That spot might have had some good coverage into Portland, but it would have put me too far behind.

CN88

The next stop was an elementary school in Lake Stevens. I made good time getting there and started but five minutes after the scheduled time. The 90 minute stay (plus a few QSOs while in motion) gave 48 QSOs.

CN98

The last grid was CN98, about 3,000′ on the side of Mt. Pilchuck, with excellent reach north, west, and south. I lowered the front mast before the ascent. The (mostly) gravel road comes with plenty of overhead clearance for antennas, but some nasty potholes require deviations to the edges of the road where branches hang lower. For once, I hit the airwaves ahead of schedule—by one minute—leaving 91 minutes to the end of the contest. There was a burst of activity at the end, as I made 65 QSO, including two with AC7MX that went right down to the end.

A dark finish to a dazzling contest weekend
A dark finish to a dazzling contest weekend

Oh…I almost forgot to mention the weather. It was warm all weekend, and Sunday was sunny. At the end of the contest, skies were reasonably clear at an altitude of 3,000′, but there was dense fog in the lowlands that extended my 90 minute trip home by about 10 minutes.

On the trip home, all the radios were turned off, except the one tuned to the public radio station blaring the blues.

Results

Two things stand out about this contest. Foremost is the number of rovers on the air in the Pacific Northwest. Eleven rovers provided me a total of 116 QSOs and 22 rare (if not unique) multipliers. Here are the numbers of QSOs and rare multipliers:

Call QSOs  Multipliers
WA7BBJ/R 28   0
K7NIT/R 24   3
KE7IHG/R 17 10
K7BWH/R 13   0
WE7X/R 12   0
VE7JH/R   8   5
KA7RRA/R   5   1
VE7AFZ/R   4   3
WA7YOQ/R    2   0
W7IEW/R   2   0
K7AYP/R   1   0

VE7AFZ/R was in CN99 when I worked him from CN76 about 35 minutes into the contest. I pointed out that I had never even worked CN99 before. He replied that he had never worked CN76 before (HA!). We worked again, a short while later, when I got to CN77.

The other notable thing was the number of active Canadian stations. In addition to VE7JH/R and VE7AFZ/R, VE7DAY, VA7FC, and VE7XF provided unique (or rare) multipliers. The result was QSOs in CN78 and CN89 on 4 bands, and CN79 and CO70 on two bands.

Score

Work consumed my time for about a week, and it wasn’t until the next weekend (Superbowl weekend) that I finally had a chance to transcribe my hand-written logs into the computer. After discounting for duplicates, here’s the outcome:

Number of QSOs:      522
Points:      687
Grids Worked:        55
Grids Activated:        10
Total Mults:        65
Score: 44,655

The score shows a nice improvement from the 2014 ARRL January VHF Contest. The number of QSOs increased slightly from 492, a gain of +30. Total points increased slightly by +43 from 644. The big difference was in the number of grids worked, which increased +18 from 37.

Here are the details by band and grid:

6 meters
2 meters
222 MHz
432 MHz
Total
CN76
6
16
1
5
28
CN77
8
10
2
2
22
CN85
18
22
6
10
56
CN86
29
33
13
18
93
CN87
24
27
12
10
73
CN88
17
15
6
9
47
CN95
3
5
3
3
14
CN96
17
21
7
6
51
CN97
19
26
13
15
73
CN98
20
21
9
15
65
QSOs
161
196
72
93
522
Points
161
196
144
186
687
Mults
16
17
11
11
55 + 10

And here are the grids worked for each band:

 Band Pts #Grids Grids
6m 161 16 CN73, CN76-9, CN84-9, CN95-8, CO70
2m 196 17 CN76-9, CN84-9, CN94-9, CO70
1.25m 148 11 CN76-8, CN85-9, CN95-7
70cm 186 11 CN76-8, CN85-9, CN95-7

My gratitude to all the folks who got on the air. Here are the stations with double digit QSOs in the log:

  • 36 N7EPD
  • 28 WA7BBJ/R
  • 26 KE0CO
  • 24 KD7UO
  • 24 K7NIT/R
  • 22 K7YDL
  • 18 KF7PCL
  • 17 KE7IHG/R
  • 16 WA7TZY
  • 14 KG7P
  • 13 WB7FJG
  • 13 K7BWH/R
  • 13 AC7T
  • 12 WE7X/R
  • 11 W7VB
  • 11 W7PT
  • 11 KX7L
  • 11 K7ND
  • 10 K5TRI

Last year, I closed my January post by suggesting it would be very difficult to score over 35,000 in the absence of sporadic E openings for this contest. Clearly, I was wrong. But the credit really goes to the increased activity, particularly on the part of other rovers.

I’ve long maintained that more rovers translate into more fun for these contests. That certainly was the case this year.

(Shortcut to this post)

Advertisements

WW7D/R’s 2014 September VHF Contest Rove

The ARRL September VHF contest comes with uncertainty. Will there be any residual sporadic E (Es) propagation left over from the summer? Will the weather in Western Washington be sunny, dry and beautiful, or cold, wet and dismal?

The weather question is a big one for the Pacific Northwest, as we are frequently transitioning between spectacular summer weather and gloomy fall weather. This year, the weather forecast was for spectacularly sunny and warm for the contest weekend. I made big plans to split my roving between driving and flying between grids, something I haven’t done for a couple of years now (except for a recent 6m Sprint).

But as the weekend of the contest rolled around, things at work were very busy and time consuming. Soon it became clear that I didn’t have the free time to realize both modes of roving. I had time to get the truck rover in order, but I needed a few more hours than were available to get the airplane rover in shape and do the planning for new routes.

I made only a few modifications to my June VHF Contest route. Specifically, I tried out a new CN88 spot that would get me away from the RF noise I experienced in my usual location at Lake Stevens High School. That changed the schedule a bit for Sunday.

The big picture is that the same grid intersections or lines were targeted:

General locations for stops on Saturday (blue) and Sunday (red)

Here were the scheduled stops (times in PDT):

GRID Location Elevation Start Time End Time
Saturday Start
CN76 Ocean Shores 16′ 11:00 AM 12:15 PM
CN77 Ocean Shores 15′ 12:30 PM 01:45 PM
CN86 Kalama, WA 1700′ 04:55 PM 05:55 PM
CN85 Kalama, WA 1785′ 06:25 PM 07:40 PM
CN95 Bonneville 100′ 09:05 PM 10:05 PM
Sunday Start
CN96 Carbonado 3200′ 07:30 AM 09:00 AM
CN86 Carbonado 3000′ 09:15 AM 10:15 AM
CN87 Carbonado 2050′ 10:30 AM 11:25 AM
CN97 Buckley (Mud Mtn) 1200′ 12:15 PM 01:45 PM
CN88 Marysville, WA 600′ 03:50 PM 05:05 PM
CN98 Mt. Pilchuck 3000′ 06:30 PM 08:00 PM

 

Station Installation

Again…pretty much the story from June. One major change since the June VHF contest was the addition of a dedicated rig (FT-857) for the Elecraft XV222 222 MHz transverter. Previously, a Kenwood TS-480SAT did dual duty as a 6m and 222 MHz rig, but the effort to change between the bands made it difficult to optimize either band.

The equipment rack included two FT-857Ds (2m, 432 MHz from one and 222 MHz from the other), one TS-480SAT (6m), a dual band Alinco FM rig, an Alinco 6m FM rig, and a Jetstream 222 MHz FM rig. That’s six separate microphones, something that requires severe discipline in systematically placing a microphone on the assigned hook.

The equipment rack.

Two rotor control boxes (rear and front) can be seen as well as a digital recorder, paddle, antenna relay switch box, and key switch box. Two FT-857D and the TS-480SAT heads were remotely mounted on the dashboard. Cell phones provided grid information and a 24 hour clock.

Other equipment.

The Contest

Early Saturday morning, I heard a news report that the intersection of I5 and US 101 was closed for an expansion joint repair, and that long delays were expected. Oh great! I had three passes through that intersection. The first was my trip to Ocean Shores for the start of the contest. The second one was simple to avoid, and the third one was very early in the morning on Sunday morning. In any case, I spent a few minutes re-programming the GPS with some alternatives to avoid that intersection. It meant I was late leaving home for Ocean Shores.

I arrived in Ocean Shores (CN76) with about 15 minutes to prepare for the start of the contest. Things started out pretty well. I first worked Mike, KD7TS, on Mt. Pilchuck in CN98. Next came John, KF7PCL, who lives nearby in CN76. We worked 6m, 2m, and 432 MHz. I caught a couple more stations on 432 MHz after that. The biggest surprise was working K7AWB in DN17 on 6m. Things worked pretty well on 2m and 432 MHz, but 6m and 222 MHz were a challenge for reasons I still cannot fully explain. Six meters just seemed very noisy.

Next was CN77 a couple of miles to the North. This was largely a bonanza of 2m QSOs with a few 432 MHz and 222 MHz QSOs and a handful of 6m QSOs thrown in.

I circled back in to CN76 to work Eric, N7EPD, on three bands, and even caught his neighbor Rick, N7EHP, on 2m. I planned a route out of Ocean Shores that took me through CN87 and CN86 very close to the CN76/CN77/CN86/CN87 intersection, with hopes of working John, KF7PCL, on three bands in two new grids. That worked exactly as planned! This burst of activity was followed by a long drive through CN86 to Kalama, WA that yielded only a few occasional QSOs—about 7 in two hours.

Checking the antenna load while in motion through CN86.

Things picked up when I arrived at my spot at 1,700′ in Kalama in the late afternoon. Six meters was still not working well, but I managed numerous QSOs into both CN85 and CN87 on all four bands. KB7ADO showed up from CN86 and we worked 2m, 222 MHz and 432 Mhz.

Set up near Green Mountain in CN86.

As evening approached I traveled about 5 miles south to CN85 where I worked many of the same stations in CN87 and CN85. From this location, I was able to work some other interesting stations, including KF7PCL in CN76 on 6m, KB7Q in CN93 (Bend, Oregon) on 2m and 432 MHz, WE7X way up in CN78 near Port Angeles, WA on 6m, and KD7HB north of Redmond, OR, in CN94.

Sunset from near Green Mountain in CN85.

The last stop of the day was an hour and twenty minutes away in Bonneville, WA, just over the CN95 border in the Columbia River Gorge. Upon arrival, I found Etienne, K7ATN, and Rachel, K7NIT (FM only category), Lou, WA7GCS, and a couple of other CN85 stations. The only non-CN85 station was Paul, K7CW, in CN87, who is still the only CN87 station to work me from this rather rock-enclosed location (this was his second time).

It is a long and lonely trip from CN95 to my hotel near Centralia. I sometimes work a station or two in CN85. This time, I was pleased to work Mike, KD7TS, on Mt. Pilchuck (CN96) on 2m from I5 while in CN85, and then we worked on 2m, 222 MHz, and 432 MHz after I crossed into CN86.

I hit the hotel and was in bed by 12:30 am, only to get up again at 5:30 am for a quick shower and to hit the road at 5:50 am. My destination was CN96 at 3,200′. On the hour and forty minute trip there, I worked the early-risers club, including Tom, KE7SW, on 4 bands, Jim, K7ND, on a number of bands, and Jim, W7FI, as well as a few others.

This spot near the CN86/CN87/CN96/CN97 intersection is always quite productive, even at 7:30 am. I wasn’t able to awaken anyone in CN85, but a number of interesting stations popped up elsewhere, including John, VE7DAY, in CO70, Rod, WE7X in CN76, Mike, KD7TS, in CN98, Michael, KB7W in CN93, and Michael, W7QH, in CN84.

Early morning in CN96.

From CN96, I made a brief stop at 3,000′ in CN86 (again). Considering that I had already spent hours in the grid the previous day, this stop provided a surprising number of new multipliers including VE7DAY in CO70 on 2m, WA7BBJ in CN97 on 6m and 432 MHz, KD7TS in CN98 on 6m, N6ZE/R in CN88 on 222 MHz, and WE7X in CN78 on 432 MHz.

The next stop, a few miles down the road, was a return to CN87, at about 2,000′ feet. This short stop provided plenty of QSOs into CN87, CN88 and CN98, but no new multipliers.

About 30 minutes away from there was the CN97 stop at the CN86/CN87/CN96/CN97 intersection, on Mud Mountain at 1,200′. This stop was remarkably productive with 55 QSOs into CN78 (WE7X), CN87, CN88, CN96 (N7BUS), CN97, CN98, and CO70 (VE7DAY).

Activating CN97 from Mud Mountain. The power lines go to a nearby hydroelectric generation facility.

From there, I had to travel 2 hours, mostly through CN87 and into CN88. The CN87 part of the trip produced 2 QSOs. Once I hit CN88, however, there was plenty of work to do. The CN88 stop was the only new location I tried this contest. It is on a small pull-over on a rural highway and gets me up to 600′. In all, CN88 produced 50 QSOs, with two new multipliers from VA7FC in CN79 on 6m and 2m.

The new CN88 stop.

The last stop of the day was Mt. Pilchuck at 3,000′ in CN98. The stop was at a location some distance from Mike, KD7TS, who spent the weekend on a shelf off the side of Mt. Pilchuck. We worked two bands while I was en route, winding my way up the mountain, and the other two shortly after I got there. Mike then stopped by for a visit on his way home. With less than 2 hours remaining, he had pretty much tapped out the region, and had a long drive home.

The grid was quite productive for me with 64 QSOs and three new multipliers: WE7X in CN78 on 222 MHz, and NL7B/R in CN77 on 6m and 2m.

Results

It was a good run. I stuck to the schedule throughout, but could be flexible when there was a benefit to it (like returning to CN77 from CN76). The station performed well and reliably, even if 6m didn’t seem to work a well as it should. The addition of a dedicated 222 MHz SSB rig seemed to work well, even at the expense of another mic in the “shack.”

Here are the QSO results:

Grid 6m 2m 1.25m 70cm
CN76 10 13 2 6
CN77 8 20 3 3
CN85 20 15 6 9
CN86 20 31 15 18
CN87 13 19 10 9
CN88 17 18 8 7
CN95 4 5 2 1
CN96 14 15 10 7
CN97 16 19 10 9
CN98 23 17 14 10
QSOs 145 172 80 79
Points 172 141 160 158
Mults 13 15 6 9

 

The total number of QSOs was 476, for 635 points.

And here are the grids worked for each band:


 Band Pts #Grids Grids
6m 145 13 CN76-79, CN84-88, CN97-98, CO70, DN17
2m 172 15 CN76-79, CN85-88, CN93-4, CN96-98, CO70
1.25m 160 6 CN78, CN85-88, CN98
70cm 158 8 CN76, CN78, CN85-88, CN93, CN97, CN98

 

That makes a total of 43 grid-band pairs.  To that we add ten multipliers for the grids activated for a total of 53 multipliers.

The final score was 33,655 (before checking by the ARRL).

Last year I had 36 grid-band pairs and ten grids activated for 46 multipliers, and 607 points for a raw score of 27,922.

There were fewer rovers this year. I found NL7B/R, AL1VE/R, N6ZE/R, KA7RAA/R and K7IP/R, although most of them were not on, or were out of range of western Washington for most of the contest. Last year there were eight rovers, most of them quite active throughout the contest.

The top stations in my log were:

  • 20 AC7T
  • 14 K7ATN
  • 14 K7ND
  • 14 KB7DQH
  • 28 KD7TS
  • 30 KE0CO
  • 31 KE7SW
  • 14 KF7PCL
  • 14 KG7P
  • 21 N6ZE/R
  • 36 N7EPD
  • 27 W7FI
  • 28 W7LUD
  • 19 WA7TZY
  • 16 WE7X

It was an enjoyable contest, where most everything worked well.

(Short link to this post.)

WW7D/M does the 2014 Salmon Run

It seems like just a few weeks ago that I was writing up the 2013 Salmon Run results. But it’s true: the 2014 Salmon Run has come and gone. And what a run it was!

Personally, it was one of my best contest efforts, in the sense of station set-up and reliability, ease of operations, planning, and execution. Unfortunately, the propagation fairies were having some fun playing tricks on us. Even so, I get the sense that many of us were still having a good time. Although I didn’t top my score from last year, I am still pretty pleased with the results.

Route

The route is pretty much a tweaked version of the one I ran last year. I posted the details for this year here. Basically, I worked Western Washington counties (KING, PIE, KITS, MAS, GRAY, PAC, THU, LEW, COW, WAH, CLAR, and SKAM) Saturday, and Eastern Washington counties (YAK, KLI, BEN, FRA, ADA, LIN, GRAN, OKA, FER, and DOU) on Sunday.

As it turned out, I kept to the route and stuck closely to the schedule. Doing the route for a second time has its advantages—this time there were no wrong turns or other unwanted excursions.

Platform

The Salmon Run comes at a very busy time of the year for the mobile contester. The week before the Salmon Run is the ARRL September VHF Contest. The Monday after the Salmon Run is a 2m VHF Sprint. On top of that, the Salmon Run happens just as things get very busy for me at the University of Washington, as we ramp up for the school year that starts the next week.

The Salmon Run platform was a little more complicated than necessary because it included stuff left over from the VHF contest and allowed me to quickly set up for the sprint the Monday after.

Last year, I did the Salmon Run in my 1988 Toyota pickup truck, with two homebuilt screwdrivers in the back of the bed on each side, a Hustler stalk toward the cab, and a front rotor with a short 2m yagi and 6m hex beam on the front. The VHF antennas were good for a few QSOs with Gabor, VE7JH, who I knew would be on a mountain top location with good reach into Western Washington. But I hadn’t heard from Gabor about a Salmon Run effort this year. Additionally, I had built a third screwdriver that I wanted to mount on the front. That would mean I could go Hustler-free for the Salmon Run.

So, I again installed two screwdrivers on the back (with an unused rotor in place for the Monday sprint):

Rear antennas

For the front antenna mount, a chunk of aluminum bar was fashioned into an antenna mount using the rotor:

The front antenna using an antenna rotor for mounting.

The large coil of coax is two lengths of LMR-240 that would feed antennas on top of a 25′ mast for the VHF sprint. One of them fed the screwdriver antenna.

Additionally, magnet mount verticals were used for 6m and 2m…just in case someone wanted to try these bands.

The antenna farm.

The front screwdriver had a whip length that made it useful for 10m to 75m. The rear driver-side antenna worked on 15m to 80m, and the rear passenger side antenna had a whip with a capacitance hat that allowed it to work very well from 20m though 80m. With three screwdrivers, it would give me the ability to move between 15m, 20m, and 40m during the day with no antenna reconfiguration, and between 20m, 40m, and 80m at night.

Inside the truck was a rack of gear that included two Yaeus FT-857Ds, one as a second HF rig (with an LDG tuner) and one for 6m and 2m, a Kenwood TS-480SAT as the primary HF rig, an Alinco 2m FM rig, and 170w bricks for 6m and 2m. To the left of the rack can be seen an antenna relay control box that allowed me to switch antennas between the Kenwood and Yaesu rigs, and between the VHF equipment, and a paddle, a Tascam DR-1 digital recorder, a K1EL Winkeyer, and a switch to move the keyer between three rigs. A rotor control box—not used for this contest—can be seen in front of the pantry. One dual antenna control box for the rear antennas and a single control box for the front antenna can be seen near the midline.

The shack.

The operating position included heads for both HF rigs and two cell phones. One phone acted as a 24 hr clock. The other phone ran an application (“Where Am I”) that continuously reports the current county—just in case I got confused about my location.

The operating position.

Behind the passenger seat sat a second battery in a fiberglass box, an N8XJK Super Booster, and an antenna relay box.

The Contest

Saturday

I left Redmond, WA about 7:30 am (PDT) for the 9:00 am contest start, and arrived on the KING–PIE starting point about 30 minutes early. That gave me plenty of time to test out the equipment, get the antennas set up, and listen to the bands. I found that 20m was in fantastic shape with lots of Scandinavian stations booming in for the CW Scandinavian Activity Contest. I could hear some activity on 40m and 15m.

As 9:00 am approached, 20m seemed to fade a bit. I spent the first 20 minutes trying to work Scandinavian stations, but only managed four before N6MU found me on CW. We also worked 20m Phone, a pattern that would continue through the contest. After 20m phone failed to provide many QSOs, I went to 15m CW and managed to work a couple of stations in the SC QSO party. Before leaving the county line, I tried 40m and managed to work BC and a few WA stations.

To give you an idea of the band conditions, last year from this spot, I made 36 contacts (times 2 because of the county line), although 4 of these were with VE7JH on 2m and 6m SSB and CW. So, let’s say 32 contacts, about 2/3rds on 20m. This year I made 15 QSOs, 2/3rds of them on 20m. The one interesting difference is that this year I worked Sweden, Finland and Norway. Last year produced only North America QSOs at that first stop.

Twenty meters was modestly productive for the next few counties. I arrived at the Grays Harbor–Pacific county line at 2:10 pm, and finally got a serious run going, but on 40m. Twenty continued to be marginal. At 4:00 pm, driving through Grays Harbor, a few Japanese stations popped up on 15m along with a handful of U.S. stations. Twenty meters seemed to open up around 5:00 pm while I was on the Thurston—Lewis county line. An hour or so later, it became unproductive.

Sitting on the Grays Harbor–Pacific county line

Speaking of the Thurston—Lewis county line…. When I got to the county line, I was backing my truck up to be on top of the line. The rear passenger screwdriver—the one with the capacitance hat—snagged a road-side sign. As I continued to back up, it bent the antenna forward and broke it at the base. And it was my best antenna, but I still had two screwdriver antennas to work with. The repair is pretty simple…if I had carried a spare part, I probably could have fixed the antenna in about 10 or 15 minutes.

Down goes one screwdriver antenna.

Eighty meters opened up about 7:30 pm (PDT) while I was on the Wahkiakum–Cowlitz county line. I got a run going on CW and then an even better run on Phone, and it was pretty much just 80m for the rest of the evening.

At midnight, I was in the hills above the Columbia River on the Clark–Skamania county line. In previous years, I would stop at a hotel in Washougal, WA about 20 minutes West of me, and then wake up at an obscene hour for a 3 hour drive to E. Washington. I’m definitely not a morning person, so I’d rather drive late at night, than get up early. So this year, I decided to do some of the driving at night. I drove 1.5 hours to The Dalles, Oregon to spend the night in a hotel.

Tucked in at the Skamania–Clark county line.

Sunday

I was out of the hotel parking lot by 7:00 am (PDT) for a 2 hour drive to the Klikitat–Yakima county line.

Sun rise over the Columbia River on Sunday morning.

The fuel gauge read a little under 1/2, but I decided to get gas closer to my first stop of the day, because that way I could make it through the day without refueling again. That was a mistake. After crossing back into Washington, I came across a sign saying there was no gas for 85 miles.

That brought back memories from last year, where I was getting low (but not critically low) on gas by the time I hit Prosser. I had less fuel in the tank this year. My gut feeling and my calculations on fuel range suggested that, if I drove for fuel economy, I should just be able to make it to Prosser—but with little reserve. Hence, I prioritized fuel economy. All I really had to do was make it within 2 miles of Prosser, since that last 2 miles was a steep, winding descent into the city, where I could coast within reasonable walking distance of a gas station.

I arrived at the Klikitat–Yakima county line with about 10 minutes to spare, and spent the time re-configuring the two remaining screwdriver antennas. At 9:00 am, the fun began on 20m with a long run of QSOs, including stations from Poland, Slovakia, Germany, Hawaii, and Japan!

After leaving the Klikitat–Yakima county line, the schedule called for a long, non-stop drive through Benton, Franklin, Adams, Lincoln and Grant counties before stopping again on the Okanogan–Ferry county line. Although gasoline was the first thing on my mind, I did manage to work a pile of stations on 20 CW in Benton County before the long descent into Prosser.

About to make the 2 mile descent into Prosser, on a gravel road.

I recalled from last year, that the gas station took a long time to come across just following my route, so I headed to the center of town looking for a fuel station. Spotting no fuel stations, I chose to park and find out where a nearby station could be found before I ran out of fuel. I got out of the truck to call a friend who could look it up more quickly than I could on my cell phone. The friend didn’t answer, but in the few feet I walked, I spotted a gas station right around the corner. Problem solved.

My error in fuel planning put me about 12 minutes behind schedule. I was able to make that up en route, and was back on schedule before Grant County.

With only one exception for 15m, I stuck to 20m CW and phone as I worked my way North. Conditions were fair to good on 20m, just not spectacular.

I had planned for it to take about an hour from the Grant County line to the Okanogan–Ferry county line. In reality, this took only 30 minutes. After a 20 minute run on 20m, I went to 40m, and after a slow start managed a good run on CW and then phone. I left the county line 25 minutes early to head for the last stop of the day, the Grant–Douglas county line.

Sitting on the Okanogan–Ferry county line

Twenty minutes later, on the Grant–Douglas county line, I had a small run going on 40m, and finished off with a small 20m run (that included working Iceland, for a new multiplier). The last 15 minutes proved almost totally unproductive. I worked W6AFA on phone, but couldn’t get any responses to my CQs. Still, I finished with a smile, knowing that everything went pretty darned well.

Results

The next week was spent entering QSOs into the computer, checking for typos and dupes, scoring, and hand-creating the Cabrillo file.

The result was 824 QSOs, 549 CW and 275 phone.

For multipliers, I worked 43 states, missing LA, MA, ME, NE, RI and VT. I only worked four Canadian regions, BC, MAN, MAR and ON. Thirty three of 39 counties showed up in the log, the missing counties being BEN, DOU, FER, JEFF, LIN, and WAH. And there were 11 DX multipliers: DL, G, HA, I, JA, LA, OH, OM, SM, SP and TF. The net was 91 multipliers.

Last year I worked 972 QSOs (775 CW and 197 phone). But what was lost in QSOs, was nearly made up in multipliers: last year I worked the same number of states, one more Canadian region, seven fewer counties, and seven fewer DX entities.

The final score this year is 200,927 (including a 1,000 point bonus for working W7DX on two modes). Last year, the final score was 213,082 (including a 1,000 point bonus).

Here is the final tally of QSOs by band

Band
CW
Phone
80
46
80
40
102
137
20
382
58
15
19
0
10
0
0
Total
549
275

Here are the top stations worked by number of QSOs:

Call
QSOs
N6MU
43
VE7CV
20
N7EPD
17
KB7N
13
OM2VL
12
NT2A
11
W5ASP
10
K9CW
10
K4BAI
10

QSL: I will eventually upload the contest QSOs to LOTW. If you want confirmation via LOTW for a contest QSO, please use WW7D/M for my call. Paper QSLs are good via mail or bureau.

(Shortcut link)

WW7D/R does the 2014 ARRL UHF contest

The August ARRL UHF contest is over, and I had a blast roving the Pacific Northwest as WW7D/R. It’s true that I enjoy all of the VHF+ contests, but the UHF contest has provided significant and interesting challenges for me in the four years I have participated.

This year, it was all about being all mode on all four bands that a limited rover is permitted—222 MHz, 432 MHz, 903 MHz, and 1296 MHz. I almost achieved this last year, but did not have a functioning 1296 MHz transverter. This year I did.

Preparations for the contest first began with assembling an amplifier for 903 MHz. I purchased a second hand Stealth Microwave 900 MHz amplifier that puts out up to 60 watts. The amplifier is for commercial cell phone equipment or some such thing.

I needed to add a 12v to 24v high current power supply, and relays for TR switching. In June, I salvaged a case from a surplus SCSI hard drive, collected other parts, and set to work. The final product looked like this on the outside:

Front panel of amplifier system for 903 MHz

The coil of coax (RG-178) acts as an attenuator to lower the transverter output from 8 watts to 0.1 milliwatts!!! That is about 40 db of loss, which is a little less than 100 feet of RG-178 at 900 MHz.

The guts of the system looked like this:

Internal view of amp system for 903 MHz

The 250 Watt power supply sits on the other side of the chassis.

My initial tests of the amplifier were with scheduled QSOs with Eric, N7EPD, and Mike, KD7TS. During one initial tests, the 24v power supply died. Looking into it a little more, it turns out that the amplifier is class A, which means it draws lots of current just sitting with the PTT switch closed but without amplifying anything. In other words, turning the amp on for CW mode, but not sending any characters, the amp draws something like 6 amps at 12 v.

I ordered a 600 watt 12v to 24v power supply to replace it. That did the trick, and I was able to make QSOs with N7EPD and KD7TS by bouncing a signal off the Olympic mountain range. I was totally blown away by this.

Next on the to-do list was getting a Down East Microwave 1296 MHz transverter working—specifically getting the LO to oscillate. At just about the same time Jim, K7ND, reported that he had purchased and tested one of the SG-Lab 1296 MHz transverters that had been popping up on Ebay. He had good things to say about the transverter and brought one for show-and-tell at a PNWVHF lunch. These puppies were a mere $200 and put out 2 to 2.5 watts, and had many advanced transverter features. And they are tiny. It was almost mid-July and time was short. I decided to buy a working transverter rather than risk not getting my DEM transverter working in time for the contest.

The transverter arrived in about 10 days, and was amazing. It was very simple to interface to the old Yaesu FT-290 I had picked up to serve as an IF rig. Even at 2W out, I was able to make QSOs using a 24 element loop yagi with Jim, K7ND, and Mike, KD7TS, again, bouncing signals off the Olympic mountains.

But I wanted more. A couple of years ago I picked up a very old 1296 MHz amplifier, model 2316 PA. The amp uses discrete components and puts out 18 W when driven with 1 W. Last year, I used the amp with a hand-held 23 CM FM radio, and it worked quite well.

With only days until the contest, I needed to build two more components: a TR relay/sequencer in order to use the amp with the 1296 transverter in split TX/RX mode, and a box to switch the IF rig’s RF and PTT signals between the 903 MHz transverter and the 1296 MHz transverter. I spent a couple of days thinking about and then assembling components.

On the Thursday before the contest, at about 2pm, I started construction. A Picaxe 18M2+ microcontroller was used to handle the logic. The rest was largely LEDs, resistors, and relays. The TR relay was a standard 12v SMA relay. But for the IF switch, a 12v latching SMA relay was used. I have a handful of these relays and they are perfect for this task provided one has something like a Picaxe to send pulses to work the switch. With a few interruptions for dinner and dishes, everything was working by midnight.

This was my first “real” Picaxe project, and it went very well. The programming was a piece of cake. The hardware was easy because I used a Picaxe project board (CHI030B) that includes a ULN2803A Darlington transistor array chip for directly driving the relays.

Friday morning I packaged everything into a project box.

The 1296 MHz transverter, amplifier, TR switching/sequencer and IF switching assembly

The Amplifier mostly sticks out of the box to provide for convective cooling. On the inside of the box are the transverter, relays, and all the RF plumbing:

The 1296 MHz transverter, amplifier, TR switching/sequencer and IF switching assembly

After that was the task of mounting the 903 transverter and amplifier and the 1296 transverter/amplifier/TR switch/IF switch onto the equipment rack. And then there was the matter of installing everything into the truck. All that took until about 9 pm on Friday.

The Plan

I had the route planned out a few days ahead of time. Essentially, the plan was to hit three grid intersections or borders:

The three grid intersections or borders visited

It was quite similar to my 2013 route but using a different spot near Mt. Pilchuck in CN98, one stop at a new location in CN87, a different CN97 stop, and slightly different stops in CN86 and CN96. I posted the schedule here.

Antennas

The antenna stacks were quite similar to last year’s. The plan was to have antennas for four “all mode” bands (222 MHz, 432 MHz, 903 MHz, and 1296 MHz) both front and rear, and additional vertically polarized antennas for FM on 440 MHz, 927.5 MHz, and 1294 MHz. I didn’t bother with a vertically polarized antenna for 223.5 MHz, because I rarely come across anyone using vertical polarization on that band.

In all, there were 12 yagis hanging off the truck. I did not include a 2m yagi this year, but had a whip set up in case coordination was needed on 2m.

The front stack of yagis is mounted on a rotatable mast, and can be rotated in motion. During the contest, the antennas are better separated and extend up to about 10 or 12 feet. They are all WA5VJB “cheap yagis”:

The front antenna stack
  • Top: 6 element 222 MHz yagi
  • First cross-boom left: 8 element 432 MHz horizontally polarized yagi
  • First cross-boom right: 8 element 440 MHz vertically polarized yagi
  • Second cross-boom left: 10 element 903 MHz horizontally polarized yagi
  • Second cross-boom center left: 10 element 1296 MHz horizontally polarized yagi
  • Second cross-boom center right: 10 element 927 MHz vertically polarized yagi
  • Second cross-boom right: 10 element 1294 MHz vertically polarized yagi

Seven runs of LMR-240 fed the front stacks. Labeling and installing seven runs of coax and a rotor control cable from the front bumper through the engine compartment, under the chassis and into the cab through a stock hole under the passenger seat is a major undertaking.

Here is the rear antenna stack with the mast collapsed for travel:

The rear antenna stack
  • Top: 12 element 432 MHz LFA yagi
  • Top cross-boom left: 11 element vertically polarized 440 MHz “cheap yagi”
  • Top cross-boom right: 8 element 222 MHz “cheap yagi”
  • Bottom cross-boom left: 24 element 1296 MHz loop yagi
  • Bottom cross-boom right: 33 element 903 MHz loop yagi

The six runs of coax (including one for the 2m vertical) and the rear rotor control cable enter the cab through the rear window with a Plexiglass insert modified with waterproof “tunnels.”

Coax runs for 432 MHz, 903 MHz and 1296 MHz were LMR-400, which I’ve not used before out of concern that the antennas would be too difficult to set up. But it worked pretty well in this application.

Equipment

A full four-band limited-rover set-up is really an 8-band set-up, since equipment to do SSB and CW likely differs from equipment for FM on the same band.

The shack

Not everything is easily visible, but here is the list:

  • On top of the rack is the 1296 MHz transverter/amp/TR switch/sequencer/IF switch.
  • Also on top is a K1EL Winkeyer used for CW.
  • Below that is the 903 MHz amplifier assembly, including the coax attenuator.
  • Below that is the SSB Electronic LT-33S 903 MHz transverter.
  • Below that is a Yaesu FT-857D for 432 MHz (the head is mounted remotely).
  • Below that is a Yaesu FT-290R 2m all mode rig that serves as the IF for 903 MHz and 1296 MHz transverters.
  • Below that is an Alinco DR-590 for 440 MHz FM.
  • Below that is a TE Systems 2212G amplifier, 100 Watts on 222 MHz.
  • Below that is an RF Concepts 4-110 amplifier, 100 Watts on 432 MHz.
  • The bottom of the stack is a Kenwood TS-480SAT used as an IF rig for 222 MHz.
  • On the left, barely visible between the mics is an Elecraft XV222 222 MHz transverter.
  • On the right side with a blue display is a Jetstream 222 MHz FM rig.
  • Also on the right side with an amber display is the Kenwood TK-981 927 MHz FM rig.
  • Hanging on the right side is an Alinco DJ-G7 for 1294 MHz FM.
  • Two rotors control boxes for Alliance HD-73 rotors can be seen above and below the paddle.
  • On top of the upper rotor is a Tascam DR-1 digital audio recorder that serves as a primary log.
  • Below the upper rotor is a control for the antenna switching relays. For 222 MHz the two antennas are switched between the two rigs. Three other switches are SPDT relays to switch 432 MHz, 903 MHz, and 1296 MHz between the front and rear antennas.
  • Not visible on the right side of the rack is a manual switch to move the 440 transceiver between the front and rear antennas.
  • Behind the passenger seat was a second battery in parallel with the truck battery with the output piped through a power booster.

The entire rack was secured with a seat belt and straps around the back of the seat.

The operating position

The Contest
Saturday started with a leisurely drive to Mt. Pilchuck. As I climbed the mountain, the truck started overheating. The truck had started overheating during the July CQWWVHF contest. In the intervening weeks, I had done the usual routine maintenance that I though would take care of the overheating. Not so.

When I got to the spot, I felt the front of the radiator and confirmed that the overheating was a partially clogged radiator. This is the vehicle equivalent of atherosclerosis that happens on 25 year old vehicles with 200,000+ miles, and the cure is a radiator transplant. A short-term fix was to use the “auxiliary radiator”—the cab heater was on full blast while climbing hills for the rest of the trip. Of course it had to be a hot weekend in the normally-cool Pacific Northwest.

CN98

I arrived at CN98 to find Ray, W7GLF. He had tried the usual CN98 location on a shelf off the north face of Mt. Pilchuck. There was a big camping party, so he came to this alternative location. But the trees were too high to make this a good portable location for him, so he headed for nearby Green Mountain.

You know what is frightening? Calling CQ for the first 60 seconds of the contest and getting no response. I started checking for obvious mistakes when I heard N6LB calling CQ on 222 MHz. Things picked up after that.

Jim, K7ND, was next, and the three of us went to 432 MHz. Jim and I then went to 1296 MHz and 903 MHz and made easy QSOs. Hot damn…this stuff works!

Eight minutes into the contest, I worked Mike, KD7TS, on 223.5 MHz. He had traveled to Ocean Shores (CN76) for the day. His excellent signal suggested that we might be able to work on 903 MHz and 1296 MHz. After a 432 MHz QSO, we worked on 903 MHz. It wasn’t until later in the first hour that we completed a QSO on 1296 MHz.

Thirty minutes in, I heard my buddy Etienne, K7ATN, on 223.5 MHz with an excellent signal. He was on the summit of Mary’s Peak, Oregon (CN84fm) at 4100′. It was an easy 260 mile FM QSO. We didn’t manage to work on 432 MHz.

Just as I was getting ready to leave, Ray, W7GLF, showed up from CN98 on Green Mountain. We quickly worked all four bands (four multipliers for each of us) so that I could get underway.

The Rover (CN98)

CN88

The next stop was Lake Stevens High School, CN88 at 400′ MSL. This location was a mistake, and I should have known that from last year. The spot is pretty good for VHF contests, but the RF noise on 903 MHz prevented any QSOs except with nearby W7GLF. Alternative CN88 locations that are higher are hard to find without traveling an hour to the north. But that probably would have been more fruitful. Next year.

CN87

A couple miles away, at the NE corner of CN87, is another school at about 400′ MSL. This new-to-me location was much quieter, but even less productive. It did allow me to work W7GLF on four bands, but I could have done that by pulling over to the side of the road and using the front antennas instead of a full set-up. It might be a good VHF location, but for the next UHF contest I’ll skip this spot.

Next on the agenda was an hour and a half trip through CN87 to….

CN97

Mud Mountain is a easy stop near the CN97/CN87/CN96/CN86 intersection that sits at 1,700′. It is moderately productive on UHF+. The haul included 6 QSOs on 1296 MHz and three QSOs on 927.5 MHz.

It was in CN97 that the first big problem occurred–903 MHz went half dead. I could hear just fine, but people could not hear me. The transverter was putting out power, but the amplifier, apparently was not. At some point I noticed I had left the transverter PTT switch on while the IF rig was in CW mode. Remember…this is a class A amplifier, so it gets hot with the PTT switch closed, even without transmitting. I imagined he amp overheated and died. On the other hand, the inexpensive 12v to 24v power supply was the lowest quality piece of electronics in the system. So, perhaps that was the problem.

I decided I would do surgery to try and bypass the amplifier once I got to CN96. That would only work if the 24v power supply works, because the internal TR relay was a 24 volt relay. (I had a stand-alone relay, custom built by K7ND for the transverter, but left it at home. Had I remembered to bring that relay along, it would have taken me 30 seconds to reconfigure the transverter to bypass the amp!).

CN87

The next stop was about 2000′ MSL in CN87 at the SE corner of the grid. I worked a few more stations without setting up the front antennas. The front antenna snagged three more 1296 MHz QSOs. Alas, 927.5 MHz FM didn’t work well from here.

CN86

A couple miles up the road, at 3000′, I did a quick series of QSOs in CN86, again, without setting up the rear antennas. The Pacific Northwest UHFers were fantastic…we completed 21 QSOs in 9 minutes, including three on 927.5 MHz FM and six on 1296 MHz.

CN96

A quarter of a mile up the road, the performance was repeated with 22 QSOs in 10 minutes, again just employing the front antennas. I turned my attention to diagnosing the 903 amplifier, occasionally making calls.

In the middle of this, a car came down the road traveling back to civilization, and a young woman jumped out to ask what I was doing. After I mentioned ham radio she said she was a new ham—KG7GWD. And she had a hand held with her! We worked on 446 MHz, and I described to her where CN86 began. I wanted to describe where CN87 started, but her passenger was eager to get going. A few minutes KG7GWD/R worked me from CN86. That was two new QSOs and two new multipliers! If I had had my wits about me, I would have moved to CN86 and worked her again. (That would have been difficult with the 903 amplifier disassembled and not secured…but still).

Instead I kept doing surgery and occasionally calling. KB7ZEN responded to my CQ on 223.5 MHz. He was in CN86 (new multiplier!). And he had other bands. We worked on 432 and 927.5 MHz (new multiplier!). Here, again, I should have ventured 1/4 mile down the road into CN86 and worked him again. I was too obsessed with the 903 MHz amp.

The 12v to 24v power supply wasn’t working. I found a small glass 15A fuse that was blown. Of course, I didn’t have a spare. I rigged up something hillbilly style with a small wire. That immediately blew. I figured the amp was toast, so I snipped the power supply and TR wires to the amp, and rigged up another fuse to provide power to the TR relay. After moving a few SMA connectors, the transverter was working solo. Eric, N7EPD, helped me verify that everything was working.

By the time everything was reassembled and secured, it was late (which around here means after 10:00pm). I never put up the rear antennas in CN96. Even so, the grid was remarkably productive with some 30 QSOs and three new multipliers.

My last QSO of the evening was with Rick, N7EHP, who had waited up for me to transition back through CN86. The last stop of the evening was a motel in Centralia, where I hit the sack at 1:00am.

The rover (CN98)

CN86

The alarm went off at 5:50am so that I could be on the road by 6:15am for Kalama, WA.

I was set up in CN86 near Green Mountain (a different Green Mountain than the one W7GLF was on) by 7:45am. I was expecting a small pile-up of CN85 stations from Vancouver, WA and Portland, OR. Alas, it seems that the entire ham population of that metropolitan region takes a collective early August vacation. Nothing.

Eventually, KB7ADO, in nearby Kelso, WA (CN86), answered my CQs on 223.5 MHz. He had other bands, and we completed QSOs on 927.5 MHz and 432 MHz.

At the same time, I finally worked the first CN85 station—Dave, N7DB on 223.5 MHz. Eventually we worked on 432 MHz as well.

I heard a faint CW signal on 432 MHz in response to my CQs. The signal peaked toward the NW, and after a few minutes I got KB7W in CN93—Bend, OR. I may have been working him off of Mt. Rainier as Bend is south and east of me, and on the other side of the Cascade mountains.

CN85

With two hours remaining, I made a beeline for CN85, on Green Mountain Road, where a friend lets me on his property to a spot at 1,800′.

The Seattle crowd came alive with this new grid, and I worked a pile of CN87 stations on 432 MHz and then 222 MHz. I also worked N7DB and KB7ME in CN85, but that was it for CN85. KB7ADO worked me on 223.5 MHz and 432 MHz, but we couldn’t quite make it on 927.5 MHz.

The last hour was mostly spent trying to work people on 1296 MHz and 903 MHz. I managed QSOs back into CN87 on 1296 with K7ND, KE0CO, N7EPD and N7MWV, but 903 MHz yield nothing. I could hear people, but my 8 watt signal just couldn’t cut through the RF noise that plagues 33 cm in the Puget Sound urban areas.

With fifteen minutes remaining my power booster started complaining about low voltage. In my hurry to activate CN85, I had left the truck headlights on. The pair of batteries couldn’t start the truck, so I separated the truck battery from the “radio” battery hoping the truck battery would recover enough to get me going after the contest. The radio battery was down to 9.5 volts.

With three minutes remaining, I heard a weak CW signal responding to my CQs on 432 MHz. And, again, it was KB7W. This QSO was a little easier than the first one. It was a fine way to end the contest.

Score

The final tally was 178 QSOs and 25 grids worked. Adding the 7 grids activated gives 32 multipliers. (Last year I had 137 QSOs and 22 multipliers.) Here are the QSO details:

Grid 222 MHz 432 MHz 903 MHz 1296 MHz
CN85 8 10 0 4
CN86 8 11 4 6
CN87 10 5 2 4
CN88 7 7 1 4
CN96 9 12 4 5
CN97 7 10 3 6
CN98 9 9 8 6
Total 58 64 21 35

And here are the grids worked for each band:

 Band Pts Grids
222 174 8 CN76 CN84 CN85 CN86 CN87 CN88 CN97 CN98
432 192 9 CN76 CN85 CN86 CN87 CN88 CN93 CN96 CN97 CN98
903 126 4 CN76 CN86 CN87 CN98
1296 201 4 CN76 CN87 CN97 CN98

The final (preliminary) score is 22,464, a little over twice last year’s score.

Postscript

It was an excellent adventure and a very good run. I was a little disappointed by the absence of activity from VE7 stations and the low turnout of stations around Portland, but the Puget Sound stations kept me going.

The truck started right up after the contest, and the trip home was uneventful.

Monday after the contest, I worked on the 903 MHz amplifier. The power supply fuse was replaced with a proper fuse, and everything seems to work just fine. The ultimate test will be the Fall Microwave Sprint. Evidently, when the amp gets hot, it draws enough current to blow the power supply fuse. The solution, to prevent me leaving the PTT on for too long, is a PTT time-out timer. Since I really should add a sequencer to the 902 MHz amplifier to preserve the TR relay, the timer will be easy to add.

(Shortcut link)

WW7D/R roves the 2014 ARRL June VHF contest

The June VHF contest always holds much promise as we go into prime sporadic-E (Es) season. Activity is usually quite high, even with Fathers Day on Sunday.

Last year, the atmospherics didn’t cooperate for most of the country, including in the Pacific Northwest. My final results were 497 QSOs and 35 grids. It was good enough for 1st place in the Western Washington section and the Pacific Division, and 3 place overall for the Limited Rover category.

My best June score was in 2012, when we had spectacular Es openings, including double hops between the Pacific Northwest and the East Coast. My final results were 358 QSOs, 87 grids, and 19 states plus Canada and Mexico. So for this contest, the final score of 38,950 was good enough for 1st place in the Western Washington section and the Pacific Division, and 5 place overall for the Limited Rover category.

So for this year, my objective was to beat my previous June score of 38,950.

Route planning

Preparations started long before the contest began. Until it became clear that the weather would not cooperate, I considered two routes. One route began by flying an airplane from airports in CN85 to CN76/CN77 to CN79.

But the weather selected for me a fully terrestrial rove. I spent a bit of time trying to improve the route I ran in the January VHF contest. In the end, I only tweaked the route a bit. Specifically, I decided to hit CN98 on Mt. Pilchuck instead of nearby Green Mountain. (I did go to another Green mountain near Portland, however.) The road to Green Mountain was not cleared, according to the National Forest Service web site. The change did not affect timing.

The only additional planning was to add a series of stops along the longer routes. That way, if there was an Es opening, I could head for the alternative location and milk the opening for all it was worth. I didn’t end up needing any of these locations.

General locations for stops on Saturday (blue) and Sunday (red)

Here were the scheduled stops (times in PDT):

GRID Location Elevation Start Time End Time
Saturday   Start 09:00 AM  
CN76 Ocean Shores 16′ 11:00 AM 12:15 PM
CN77 Ocean Shores 15′ 12:30 PM 01:45 PM
CN86 Kalama, WA 1700′ 04:55 PM 05:55 PM
CN85 Kalama, WA 1785′ 06:25 PM 07:40 PM
CN95 Bonneville 100′ 09:05 PM 10:05 PM
         
Sunday   Start 06:15 AM  
CN96 Carbonado 3200′ 08:10 AM 09:35 AM
CN86 Carbonado 3000′ 09:50 AM 10:35 AM
CN87 Carbonado 2050′ 10:55 AM 11:45 AM
CN97 Buckley (Mud Mtn) 1200′ 12:40 PM 02:05 PM
CN88 Lake Stevens HS 400′ 04:15 PM 05:30 PM
CN98 Mt. Pilchuck 3000′ 06:30 PM 08:00 PM

Station Installation

The station installation was pretty much what I had in January.

The station

I had a new Yaesu FT-857D. I damaged the front end of my old one during a Spring Sprint rendering it with reduced sensitivity on 2m and 432 MHz. Parts were on order, but they wouldn’t arrive until after the contest. So I bit the bullet and ordered a new one. I used the old FT-857D as a 6m FM rig in place of the Alinco I usually use.

Here is the full list of equipment:

  • A Kenwood TS-480SAT for 6 meters and 222 MHz SSB and CW (hidden at the very bottom of the rack, with the remote head on the dash)
  • An Elecraft XV-222 222 MHz transverter, not visible, but hanging on the lower left side of the rack
  • A Yaesu FT-857D for 2 meters and 432 MHz SSB and CW (remote head on the dash)
  • A Yaesu FT-857D for 6 meters FM
  • A Jetstream JT220M, 50 Watts, 223.5 MHz FM (hidden behind mike on right side of rack)
  • An Alinco DR-590 dual band 2 meter, 440 MHz rig for FM simplex (remote head on dash)
  • A TE Systems 2212G, 100 Watts on 222 MHz
  • A TE Systems 0510G Amplifier, 170 Watts on 6 meters
  • An RF Concepts 4-110 amplifier, 100 Watts on 432 MHz
  • An RF Concepts 2-417 amplifier, 170 Watts on 144 MHz (hanging on the right side of the rack)
  • A k1el Winkeyer (top)
  • Two Alliance HD-73 rotor control boxes (one out of view)
  • Antenna switch (box in front of rotor control)
Antenna switching box with remote head

The single biggest station difference this year was a home-made antenna switching box. The box uses SMA latching relays to perform antenna switching. The switches are in a remote box that is near the operating position. Three of the antenna switches are SPDT, and simply allow me to switch a rig between the front and rear antennas. This is done for 6m, 2m, and 432 MHz. For 222 MHz, I have two rigs (a 222 MHz transverter + amplifier combination, as well as a 222 MHz FM rig), and I want to use both the front and rear antennas with each rig. Thus, the 222 MHz switch uses 4 SMA relays to create a low-loss, high isolation antenna cross-over switch.

Antenna switching box in situ

Antennas

The antennas were pretty much what I’ve used in the past, but with one difference of putting the 6m yagi on top of the rear stack, instead of the middle. I rebuilt both the front and rear antenna masts. Antennas were cleaned, refurbished, and tuned in preparation for the contest.

Rear antenna stacks

The rear mast extends to about 25 feet for when the vehicle is at a rover location:

  • 50 MHz: Homebuilt 3-element Yagi (top)
  • 144 MHz: An 8 element WA5VJB “Cheap Yagi” (middle)
  • 222 MHz: An 8 element WA5VJB “Cheap Yagi” (bottom)
  • 12 element LFA yagi (bottom)
Front antenna stacks

The front mast can be legally extended up to 14′ and rotated while in motion. In practice it is usually about 10′ above ground level to avoid low-hanging branches.

  • 50 MHz: Two element classic hex beam (top)
  • 144 MHz: A 4 element WA5VJB “Cheap Yagi” (middle)
  • 222 MHz: A 6 element WA5VJB “Cheap Yagi” (bottom right)
  • 432 MHz: An 8 element WA5VJB “Cheap Yagi” (bottom left)

The Contest

The contest began early Saturday morning for me. I was on the road by 7:30 am PDT for the long drive from Redmond, WA to Ocean Shores, WA. The trip there was uneventful, although there was some kind of parade being set up in Ocean Shores for 11:00 am. Fortunately, I arrived before things got going.

CN76

This location is at the Ocean Shores airport, in the car parking lot. The airport was surprisingly active, with a crew of locals putting up a new wind sock, and a Young Eagles event starting around noon. Friendly people stopped by to chat.

As the clock struck 1800 UTC, I called CQ, and Paul, K7CW came right back to me. On 2m, I heard Caesar, N7BUS, calling CQ from Mt. Eleanor. Then I worked my friend John, KF7PCL, who lives in Ocean Shores (CN76!) on 6m and 2m. I had spoken to John many times during contests over the past few years and we had some email correspondence, but it wasn’t until he spotted me at the 2014 SeaPac convention that I actually met him. He told me he would be on for the contest.

As it happened, there was another CN76 station on some ways to the South, W7Y. We worked on 6m and 2m but I wasn’t able to hear them on 432 MHz.

CN77

At the appointed time, I headed about 1/2 mile south to the next stop in CN77. Among other folks, I worked W7Y on 6m and 2m again. I also worked KF7PCL on 6m, 2m, and 432 MHz, and remembered that I had forgotten to work him on 432 in CN76. So, on my way out of town, I swung by the airport again and worked him on 432 MHz.

Arrival in CN77, Ocean Shores, WA, and ready to put up the rear mast

CN86

In departing Ocean Shores, I modified the usual route to Hoquiam (CN86) to traverse a bit of the southwest corner of CN87. That allowed me to work KF7PCL on 6m and 2m again. Then, of course, I worked John again (on 3 bands) in CN86, for a total of 11 QSOs with KF7PCL. There would be one more with him near the end of the contest.

The drive through CN86 is a long slog through minimally productive terrain. I took a slightly longer route through Olympia that briefly brought me back into CN87 with a shot at Seattle. Only about 20 QSOs were made for the next 1.5 hours.

Activity picked up as I headed up hill toward the CN86 stop near Green Mountain. The location provides excellent reach into Seattle and Portland. A few stations as far south as Salem, OR were worked, and W7Y in CN76 was worked again. From this location I made my first QSO with Steve, KE7IHG/R, who would shadow me on Sunday.

CN85

This grid is located only about five miles away on the other side of Green Mountain, but about 10 miles by road. The location has even better reach into Portland and Seattle. One big surprise was working KA6BIM in CN73 on both 2m and 6m.

Activating CN85

CN95

As things wound down in CN85, I headed for N. Bonneville, WA, on the Columbia River Gorge to just inside the CN95 grid. I arrived a few minutes after 10pm PDT. The location is surrounded by rock to the north and south, but gets into the Portland area quite well. The big surprise here was working W7EW in CN84 on both 6m and 2m. And then there was KA6BIM in CN73 on 6m!

I packed it in around 11pm PDT and headed for a motel room in Centralia, WA, about 2 hours away. No more QSOs were made en route.

The day passed without so much as a hint of Es.

CN96

Sunday began at 5:45am, with a quick shower and a departure time of 6:15. I had about two hours of travel to hit the next stop in Carbonado, WA, at 3,200′ in CN96. This is one of the choicest roving locations in the Pacific Northwest. Of course, there were QSOs to be made along the way. While en route, I made a couple of QSOs in CN86, 24 QSOs in CN87 and ten more QSOs traversing a few miles of (elevated) CN86. At some point in CN87, I drove right by Tom, KE7SW’s house, and joked about stopping for some hot coffee (I was drinking day old stuff out of a second thermos), but duty called and I pushed on.

The view and the reach from the 3,200′ CN96 spot is phenomenal. QSOs from Sequim, WA to Portland, OR and places in between ensued. I was happy to work W7EW in CN84 on 6m, and KB7W in CN93—that’s Bend, OR on the other side of the Cascade Mountains. I worked my buddy Doug, AC7T, who lives down the street from me in CN87. We worked on 6m and then, again, on 2m. He was using the 6m and 2m antennas I usually use out of my airplane, and only 2.5 watts on 2m. We were both pleased.

After 2 hours, I managed about 80 QSOs. But there were no Es QSOs at all. Occasionally I heard a brief opening to California, but the opening vaporized before I had a chance to join the fun.

CN86

A few minutes behind schedule, I moved down the road to CN86 (again!). This 3,000′ location and has, in the past, provided many QSOs even after spending most of Saturday in the grid.

I worked about a dozen stations, including Doug, AC7T, again on 6m and 2m. About this time, Steve, KE7IHG/R drove by me on his way to the CN96 spot I had recently vacated. Great! After some set-up time we worked on all four bands giving me four new multipliers.

The whole time at this spot, Es propagation teased me with occasional bursts of southern California coming through, but then fading away. Finally, at about 10:45 am PDT I started working a few out-of-region grids. Another 40 minutes yielded three QSOs to DM45 and one to DM33 (and more local QSOs).

After some 30 QSOs in CN86, I circled 1/4 mile back to CN96 and worked KE7IGH/R on four bands, giving him four new multipliers, and then headed down the hill to CN87.

CN87

I arrived at this stop, at 2,050′ on the same road, about 45 minutes behind schedule. There was no sign of Es, but I filled in some QSOs with local folks, and worked KE7IGH/R on four bands. I tried to save time by shortening my stay a few minutes.

While en route to CN97, I did work K6RMJ in DM13.

CN97

I arrived and was set up only about 20 minutes behind schedule in CN97. I worked local stations for about 20 minutes. Then an opening to California produced QSOs to CM86, CM88, CM95 and CM98, followed by three QSOs to DM06, all over a 25 minute period. After the burst of CA, I worked KE7IHG/R in CN97 in nearby Buckley. I left the grid at the scheduled 2:05pm departure time with a total of about 50 QSO. My spot in CN88 was about 2 hours away.

Along the way, I discovered that KE7IGH/R was right behind me on Interstate 5. We were both headed to Lake Stevens High School. I told him I would go to the nearby elementary school, instead. The location is slightly higher, slightly closer, and, I guessed, it would have less RF noise than the noisy High School. The disadvantage is that it had poorer exposure to the south, where most local stations are located.

As I neared the CN88 grid line, I worked my pal Dave, KA7RRA/R, who was sitting up at 3,150′ on Mt. Pilchuck. We worked on 6m and 2m, but he didn’t have a 432 MHz antenna. He did, however, have a handheld dual band FM rig, so we worked on 446 MHz. We did it again after I passed into CN88.

CN88

As I suspected, the elementary school was relatively RF quiet, but some stations to the south were harder for me to work than KE7IHG/R. I worked no stations south of CN87. And no sign of Es. I left the grid early, after about 35 QSOs, to head to Mt. Pilchuck. KA7RRA/R and I established that we would be 3/4 mile apart at my planned destination.

CN98

This particular Mt. Pilchuck location was just shy of 3,000′. I began the 2013 ARRL UHF contest from another nearby location, but this spot was new to me. It was quite a spot. I arrived about 35 minutes early and had already worked 14 stations in motion, and would work over 50 more before the end of the contest.

Here were some of the highlights. John, KF7PCL, worked me again from CN76. I worked W7EW in CN84 on 6m and 2m, and toward the end of the contest, we attempted and completed a QSO on 432 Mhz, over a 225 mile path. After many attempts, I worked VE7DAY in CO70. KE7IGH/R worked me on 223.5 MHz from CN98, adding a new multiplier for both of us. I worked K7NG in CN72 on 6m for another multiplier. And a QSO with VA7FC provided my only 6m QSO to CN79. I worked a total of 5 new multipliers at my last stop!

Alas…no Es. Even so, the end of the contest was a lot of fun.

The morning after

The Score

The contest results are summarized in the table below. The preliminary score is 681 pts × (50 multipliers + 10 grids activated) = 40,860.

6m
2m
222 MHz
432 MHz
Total
CN76
6
15
2
4
27
CN77
13
11
1
2
27
CN85
36
23
9
10
78
CN86
38
33
13
13
97
CN87
21
18
8
7
54
CN88
12
10
5
7
34
CN95
8
9
2
2
21
CN96
34
26
11
12
83
CN97
29
9
5
8
51
CN98
31
17
8
12
68
QSOs
228
171
64
77
540
Points
228
171
128
154
681
Mults
21
13
7
9
50 + 10

This slightly beats my 2012 score. But instead of 358 QSOs and 87 grids + 9 activated, I ended up with 540 QSOs, 50 grids + 10 activated. The difference is largely a huge decrease in grids owning to few sustained Es openings this year, but a large increase in QSOs. This is the first time my (preliminary) score has exceeded 40,000 in an ARRL VHF contest.

Here were the stations that made 10 or more QSOs with me (of a maximum possible of 40):

35 KE7SW
26 N7EPD
26 KE7IHG/R
23 KE0CO
20 KG7P
15 W7FI
15 KI7JA
14 W7VB
14 W7EW
14 N5CR
13 K7ND
12 KF7PCL
10 WB7FJG
10 KD7RRA/R
10 K7YDL
10 AC7T

And K7CW (50 MHz only) worked me in 9 of 10 grids.

Conclusions

The lack of sustained Es propagation was a bit disappointing but, overall, the contest was quite enjoyable. Small station improvements (e.g. the antenna switching box) contributed to a better score, but the biggest improvements were operating conveniences or procedures that greatly bumped up the raw QSO count. And it was helped by the presence of two other rovers (KE7IHG/R and KA7RRA/R) in the region.

(Short link)

Tag Cloud